Towertalk
[Top] [All Lists]

Re: [TowerTalk] Attaching "flex" cable to crank-up standoffs

To: "Dick Green WC1M" <wc1m73@gmail.com>, "'Marv Shelton'" <marvs@att.net>, "K8RI" <K8RI-on-TowerTalk@tm.net>
Subject: Re: [TowerTalk] Attaching "flex" cable to crank-up standoffs
From: "Patrick Greenlee" <patrick_g@windstream.net>
Date: Thu, 16 May 2013 17:38:22 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Dick would you mind sharing your coax installation details. I am interested in remote raise and lower for an automated crank-up tower with an eye toward NOT being out at the base of the tower lowering it as a thunderstorm approaches. I am interested in "FAIL SAFE" operation that does not need observation, even remote observation. You are a ray of sunshine on this topic as I got beat up pretty thoroughly for mentioning the idea of unattended raise/lower of an automated crank-up tower previously.

Thanks in advance for your consideration.

Patrick AF5CK



-----Original Message----- From: Dick Green WC1M
Sent: Tuesday, May 14, 2013 2:44 PM
To: 'Marv Shelton' ; K8RI
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Attaching "flex" cable to crank-up standoffs

When I installed my 72' rotating tubular motorized crankup back in 1997, I
used LMR400UF. Big mistake. IMHO, that stuff is so stiff it shouldn't be
called "flexible". There were a number of issues with dressing the coax on
the tower that were due to total lack of instructions from U.S. Tower, but
the long and short of it is that the LMR400UF was so stiff that a big loop
of it "crept" around the tower while it was being lowered and got caught in
the motor mounting brackets. Next time I raised the tower, the coax snagged
on the brackets just before the tower reached full up. The tower proceeded
to lurch violently back and forth in a sickening manner in the second or so
before I realized what was happening and hit the power switch (I was in the
shack at the time, 265' away, watching through a window.) I ran to the tower
and found, much to my relief, that the plastic balun housing on the TH-7 had
exploded, which freed the SO-239 and the coax before the raising cables
snapped or the pulleys or the motor were destroyed.

I reconfigured the standoffs and bought an extra one to put below the motor
so the coax couldn't possible get snagged again. I also put a hardware cloth
cage around the base to keep the coax away from the rotor. Most important, I
replaced the LMR400UF with RG-213. I have had no snags since. I'm completely
confident in raising and lowering the tower remotely without seeing it.

Some years later, I ran some flexibility tests between Buryflex, LMR400UF,
Belden 9913 and RG-213. It was no surprise that the 9913 was too stiff for
the crankup or rotor loops, nor was it a surprise that the LMR400UF came in
a distant 3rd. What did surprise me was that the Buryflex was almost as
flexible as the RG-213, and the jacket was much more slippery -- perfect for
gliding through the coax standoffs on the crankup (I don't attach the coax
to the standoffs because it results in all sorts of twisting and snagging.)
Anyway, I replaced the RG-213 with Buryflex and it has performed perfectly
ever since. I can't recall how long it's been, but I'm sure it's at least 10
years. Maybe more like 15.

Incidentally, I used LMR400UF for a number of runs on the ground, like the
feedline to my 40m 4-square. That was problematic, too, because it seems
that the critters on my property love to munch on the jacket material. I had
to replace that particular 100' run, and several others, countless times.
Then I replaced the runs with Buryflex and haven't had a critter problem
since.

YMMV

73, Dick WC1M

-----Original Message-----
From: Marv Shelton [mailto:marvs@att.net]
Sent: Tuesday, May 14, 2013 8:10 AM
To: K8RI
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Attaching "flex" cable to crank-up standoffs

So, what do you think is best? RG-213???
I think getting 5 years out of low loss coax is acceptable. I can help
force at least that interval of mainten ance on one's amtennas.


Best 73's
de Marv WA2BFW/7
(from my iPad)
>
> LMR 400 is not recommended for repeated bending. It has a Copper
plated solid Aluminum center conductor.   OTOH LMR-400UF is very
flexible but does not normally stand up well to out door use. The jacket
is a rubber like material that is easily abraded, catches on most any
thing and has a short advertised life of 10 years.  Best I've gotten out
of using it in normal situations has been around 6 years.  It works very
well, but not for long.
>
> 73
>
> Roger (K8RI)
>
>
>>
>> 73's from Marv
>> wa2bfw@att.net
>>
>>
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>