Towertalk
[Top] [All Lists]

Re: [TowerTalk] Very new to this

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Very new to this
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Wed, 03 Jul 2013 08:48:55 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I can't overstress Dan's first point - do what the manufacturer says. From the web site: " LPT's need to be either bracketed to house or vehicle, guyed or rigid guy supported."

Are you buying this new, or used? In either case, I would get in touch with the company. They also say

/*"Standard: */12" x 12" base for (4) foundation bolts, 40:1 worm winch

/*Options*:/ House brackets, powder coat finish, X-base, T-bar extensions, rigid guys hidden cable, 5th section (2" square), custom-cut section lengths"

House brackets for a Rohn 25 tower are a whole different animal - but any house bracket may require reinforcement of the wall to which it is mounted. I recall an article a few years ago about putting 2X6 braces in an attic to hold the bracket securely

There is no illustration for the 1242 or the other taller ones, but the smaller ones make it pretty clear that what they are talking about is guying or bracketing the base section, because the upper sections move up and down. Still, call and ask them!


73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 7/2/2013 10:51 PM, K0DAN wrote:
It depends on what you buy (follow mfgr specs) however if you are going to do a house-bracketed tower, see if you can download the Rohn specs for their Model 25 tower, which, if IRC requires a small pad and allows maybe 20-30' above the roof bracket, depending on your antenna + wind load. The Rohn specs may not be the right match for your new tower, but they will help you understand what is required of you for a qualified installation. All this assumes your state/local governments won't require you to jump thru other hoops.

Later comes grounding, choice of antennas, rotor, feedlines, etc., etc., however the Rohn specs are easily obtained and will get you in the ballpark.

Also, as plugged by others, the "UP THE TOWER" book (http://www.championradio.com/UP-THE-TOWER-The-Complete-Guide-To-Tower-Construction.1) contains a wealth of information...if this is your first tower, the book will pay for itself many times over.

Good luck and 73

Dan
K0DAN

-----Original Message----- From: PHILIP GRAITCER
Sent: July 02, 2013 21:22
To: towertalk@contesting.com
Subject: [TowerTalk] Very new to this

After 55 years in amateur radio, I am about to get my first tower, a Force 12 LPT42. I live on a salt marsh, directly facing the ocean, hence the need for a low profile.

But once the tower comes, I have no idea how to get it up. I am planning to pour a pad and strap it to the house.

But can this collective braintrust point me to a how to manual, or even someone in the South Georgia area who can guide me?

Thanks,
Phil, W3HZZ


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>