Towertalk
[Top] [All Lists]

Re: [TowerTalk] [50mhz] hairpin matches

To: "Steven Katz" <stevek@jmr.com>, "r miles" <greenacres113@charter.net>, "6m" <50mhz@mailman.qth.net>, "antennas" <antennas@mailman.qth.net>, "towertalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] [50mhz] hairpin matches
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 9 Aug 2013 09:13:50 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
But the feed line system is pretty sloppy when it comes to keeping water out of the balun and feedline.

Elements are also flimsy. Using the 10M material would be much stronger and it can all be modeled, including the clamps, by various programs.

I dont know how the element dimensions/spacing compare to the older 66DX which had pretty poor F/B. Adding another element on the same 24' boom made a big improvement, I stacked a pair decades ago using the YO program.
But Mother Nature destroyed the elements after a few years.

Carl
KM1H



----- Original Message ----- From: "Steven Katz" <stevek@jmr.com> To: "r miles" <greenacres113@charter.net>; "6m" <50mhz@mailman.qth.net>; "antennas" <antennas@mailman.qth.net>; "towertalk" <towertalk@contesting.com>
Sent: Thursday, August 08, 2013 12:53 PM
Subject: Re: [50mhz] [TowerTalk] hairpin matches


Why not just convert it to a VB-66DX (Hy-Gain's model for 6L 6m beam, 24' boom)?

It uses a "beta" match, which is a "T" match, plus a balun, and works very well. Essentially the same thing Telrex used several decades ago.

Details are: http://www.hy-gain.com/pdffiles/VB-66DX.pdf

WB2WIK

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of r miles
Sent: Thursday, August 08, 2013 9:42 AM
To: 6m; antennas; towertalk
Subject: [TowerTalk] hairpin matches


I recently acquired a 5 el HyGain 10m monobander on a 24' boom. The yagi uses a hairpin match. The plan is to convert it to 6m. Either a WVO special on 19' of boom or use the full 24'. Since it's already in place we are considering using the hairpin. Obvoiusly shorter as the freq is nearly double 10m. My friend W4HLR will be actually doing the construction. We would like to hear your experiences with HyGain hairpin matches on monobanders. Or any monobander. Is there an advantage using a hairpin rather than gamma or other methods. DX-Eng sells hairpins & say they are better than gamma, etc. We're hoping to end up with a heavy duty yagi as the boom & element sizes of this yagi are bigger & heavier than most 6m yagis. It will be for next seasons 6m Es. If there is one. Hi! Really was poor this Summer in NW Tn.

Tnx K9IL
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
______________________________________________________________
50mhz mailing list
Home: http://mailman.qth.net/mailman/listinfo/50mhz
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:50mhz@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1432 / Virus Database: 3209/6059 - Release Date: 08/08/13


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>