Towertalk
[Top] [All Lists]

Re: [TowerTalk] Force 12 hardware and aluminum treatment for corrosionre

To: john@kk9a.com, towertalk@contesting.com
Subject: Re: [TowerTalk] Force 12 hardware and aluminum treatment for corrosionresistance
From: Jim and Hannelore Fisher <jwfisher@alumni.princeton.edu>
Date: Tue, 10 Sep 2013 14:02:53 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Interesting, John. Sounds plausible but haven't noticed it so far...certainly if it has occurred it has been less of a problem here than the previous non-SS hardware breaking when I attempted to back off nuts for other maintenance or changes on the antennas.

My C51XRNjf and WARC7jf and the top 70' of their tower and associated Phyllistran guys are scheduled to come down within the next month to make room for my growing 6M EME array. I'll have a look. (They're for sale, too...)
http://www.texasantennas.com/index.php?option=com_fwgallery&view=image&id=11:ve1jf-3-stack&Itemid=268

73,

Jim VE1JF


----- Original Message ----- From: <john@kk9a.com>
To: <jwfisher@alumni.princeton.edu>; <towertalk@contesting.com>
Sent: Tuesday, September 10, 2013 1:19 PM
Subject: re: [TowerTalk] Force 12 hardware and aluminum treatment for corrosionresistance


What an awesome QTH! I also use stainless steel hardware however I have
seen severe salt spray corrosion to aluminum where the S.S. is in contact.
What do you do to protect the tower system from corrosion?

John KK9A


To: towertalk <towertalk@contesting.com>
Subject: [TowerTalk] Force 12 hardware and aluminum treatment for
corrosion resistance
From: Jim and Hannelore Fisher <jwfisher@alumni.princeton.edu>
Date: Tue, 10 Sep 2013 12:36:46 +0000

I live in a salt-air environment and have replaced just about all U-bolts and
other such hardware with stainless steel. Be sure to coat bolts with an
appropriate compound before installing nuts--if you are not familiar with
this,
ask your SS supplier.

Also, per advice from F12 many years ago, I assembled elements and then
painted
them with XIM400, which has protected them nicely. At some points, I have had over 50 F12 elements up at the edge of a cliff with saltwater to the horizon
and little fluffy balls of salty foam flying up and over.

73,

Jim, VE1JF




_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>