Towertalk
[Top] [All Lists]

Re: [TowerTalk] Driving ground rods

To: garyk9gs@wi.rr.com, "Towertalk Mailing List" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Driving ground rods
From: "Patrick Greenlee" <patrick_g@windstream.net>
Date: Sun, 13 Oct 2013 21:20:03 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Ditto, I use a Harbor Freight demo hammer and a home brew insert (to avoid $80 + shipping for store bought AKA COTS.) Works good but in really hard ground takes a while and don't forget the hearing protection. When driving rods with a sledge in hard ground the rod tends to bend. Before driving in these conditions slip a piece of pipe over the rod to keep it from bending. You may need 2-3 different lengths of pipe to accommodate the shortening ground rod as it is driven.

Warning: do not try to drive the rod with a demo hammer by inserting the end of the rod into the hammer. The rod may mushroom and then be locked inside the hammer, PERMANENTLY. I came close, hence the home brew attachment for rod driving.

Patrick AF5CK

-----Original Message----- From: Gary K9GS
Sent: Sunday, October 13, 2013 8:13 PM
To: Towertalk Mailing List
Subject: [TowerTalk] Driving ground rods

While on the topic of ground rods.

Today I had to drive some 5/8 X 8 foot ground rods.  I live on top of a
ridge that was part of the glacial push South into Southern Wisconsin.
Think sandy rocky soil with many rocks about fist sized plus hard clay.
25 years ago I had to dig a hole for a mailbox post and it took me all
day with a post hole digger.

Anyway, to drive these ground rods I rented a demolition hammer from
Home Depot.  Think small electric jack hammer that looks like a big
drill.  Made by Makita.  In place of the chisel that is usually used,
they had a bit made for driving ground rods.  Basically a hollow sleeve
that fits over the end of the ground rod.

Used an 8 ft stepladder and a friend to help.  The ground rods went in
like a hot knife through butter.  Each one took less than 5 minutes and
no pounding with a sledge hammer, water pipes, post driver, etc.  Truly
amazingly fast.  The best money I've ever spent.

--


73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032 http://www.cwops.org

************************************************
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>