Towertalk
[Top] [All Lists]

Re: [TowerTalk] screw anchors in sandy soil

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] screw anchors in sandy soil
From: "Larry" <lknain@nc.rr.com>
Reply-to: Larry <w6nws@arrl.net>
Date: Mon, 11 Nov 2013 10:11:52 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
At the beach here mobile homes must be anchored with screw-in anchors and straps. Most of the places that service mobile homes in the area can do the anchors but they would be smaller ones - 4 or 5 feet. Perhaps some of inland areas have a similar arrangement.

73,  Larry  W6NWS

-----Original Message----- From: Jim Lux
Sent: Monday, November 11, 2013 9:27 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] screw anchors in sandy soil

On 11/11/13 4:24 AM, john@kk9a.com wrote:
Interesting video! Screw in anchors would be worth considering if you have
access to the equipment to drive them in and the appropriate soil type.
Perhaps there are companies that just do this, however it is likely easier
to find a backhoe and dig a hole for a concrete slab.


There are companies that do this. Like a lot of specialized construction
things, you have to find them. I'd look for people who are in the
business of planting utility poles. (and hope it's not right after a big
storm, when those guys are busy fixing the downed infrastructure)

On the other hand, if you're looking at a big tower or an unusual soil
type, then you should be talking to an Engineer, and they'd probably
know the local vendors.  You should be talking to an Engineer to select
the appropriate anchor type for your soil in any case.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>