The RFC (The RF Connection) has the stuff in stock.
73
Jim W7RY
On 11/12/2013 4:02 PM, Richard Solomon wrote:
That's the stuff ... thanks for the lead.
There's so many different types out there that I would rather use what
folks use than re-invent the wheel.
Tnx es 73, Dick, W1KSZ
On Tue, Nov 12, 2013 at 4:54 PM, Grant Saviers <grants2@pacbell.net> wrote:
If you want adhesive lined heat shrink, almost all component suppliers
stock it - Mouser, Digi-Key, Jameco, Newark. I found some 5/8 4:1 at a
good price at
http://www.mcmelectronics.com/product/21-10990 took a while to get it
though, might be in stock now there, it wasn't available from the others.
5/8 4:1 shrinks enough for RG58/59/8X/142. 3/4" is fine for RG8 sizes.
Grant KZ1W
On 11/12/2013 3:18 PM, Richard Solomon wrote:
Where do folks get there tubing from ? I need several sizes.
Thanks, Dick, W1KSZ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|