Another good source is...
http://stores.ebay.com/TUBING-EXPRESS?_rdc=1
Look in the "adhesive lined" category.
Perry K4PWO
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Grant
Saviers
Sent: Tuesday, November 12, 2013 5:55 PM
To: Richard Solomon; Tower Talk
Subject: Re: [TowerTalk] Filled Heat Shrink Source
If you want adhesive lined heat shrink, almost all component suppliers stock
it - Mouser, Digi-Key, Jameco, Newark. I found some 5/8 4:1 at a good price
at
http://www.mcmelectronics.com/product/21-10990 took a while to get it
though, might be in stock now there, it wasn't available from the others.
5/8 4:1 shrinks enough for RG58/59/8X/142. 3/4" is fine for RG8 sizes.
Grant KZ1W
On 11/12/2013 3:18 PM, Richard Solomon wrote:
> Where do folks get there tubing from ? I need several sizes.
>
> Thanks, Dick, W1KSZ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|