"I don't know of a practical center feed for a vertical dipole that does not
include a serious common mode choke at the feedpoint."
What about a coaxial dipole?
73
Patrick AF5CK
-----Original Message-----
From: Jim Brown
Sent: Thursday, November 14, 2013 2:21 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] K9YC vertical dipole test....
On 11/14/2013 8:49 AM, John Frazier wrote:
Jim....
I noted the "simple" vertical half-wave dipole configuration on your site.
Is this the type used in your test?
Yes
Also, do you feel the choking is sufficient to "eliminate" the rest of the
feed-line past the end of the other half of the dipole from radiating as
part of the dipole?
Yes, if the choke is properly designed and wound for the frequency of
interest.
Have you ever done comparisons with your "simple" config vs. "standard"
config?
I don't know of a practical center feed for a vertical dipole that does
not include a serious common mode choke at the feedpoint. Indeed, I
consider my method FAR superior (and easier to do) than the more
conventional method of using wires for both sides of the dipole and
running coax horizontally away from the antenna. Try modeling it
(including the feedline as a common mode element) and you'll see why. :)
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|