Towertalk
[Top] [All Lists]

[TowerTalk] FW: [Amps] Fw: Crimp connector die sizes

To: "'reflector -tower'" <towertalk@contesting.com>
Subject: [TowerTalk] FW: [Amps] Fw: Crimp connector die sizes
From: "Matt" <km5vi@flukey.cc>
Date: Thu, 28 Nov 2013 02:24:49 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I have a spreadsheet to cross-reference crimp dies for the open frame
(military style) crimpers.   After reading in this thread that this info is
hard to come by, I put it up on the web for everyone's use...  

http://www.flukey.cc/km5vi/crimp%20chart.php

73
Matt
KM5VI 


-----Original Message-----
From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Hardy Landskov
Sent: Tuesday, November 26, 2013 9:06 PM
To: amps@contesting.com
Subject: [Amps] Fw: Crimp connector die sizes

All
Please correct the 9913  0.118 inch dimension as it is the crimp size for
the center pin. The shield should be 0.429 inches.
I will do the correction in this email. I have learned too there is a tool
for LMR-600 but it made exclusively for that size coax. Contact K8RI for the
info.
73 Hardy

----- Original Message ----- 
From: Hardy Landskov 
To: amps@contesting.com 
Sent: Sunday, November 24, 2013 11:26 AM
Subject: Crimp connector die sizes


All,
Here's what I could garner. These are just Amphenol crimp connectors
straight out of the Mouser catalog so it does not include overseas stuff or
other American vendors.

P/N                Coax                     Die size(inches)

172128   LMR-100, RG174,              0.128
              RG188A/U, RG316U

172171   RG316/U double shield       0.151

171142   LMR-400                           0.429

171100   RG59/U, RG142                 0.213

172214   LMR-200, LMR-240             0.213
              RG8X

172135   Belden 7808A                     0.255

172202   LMR-600                            0.610

172102   RG-8, RG-213                    0.429

172166   RG-214, LMR-400               0.429

172101   RG-59/U                             0.255

172102H243   LMR-400/B9913           0.429

     ?       Belden  9913                       0.429

Notes
1)  I did not locate a crimp tool for LMR-600.
2)  9913 is the same as LMR-400
3)  Add 523- in front of the Amphenol P/N to get the Mouser number.
4)  Notice that Amphenol makes different connectors for the same coax, RG-59
for example.
     I have no explanation for this.


I actually made an Excel spreadsheet but I guess this reflector does not
allow attachments.

73 Hardy N7RT



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3426 / Virus Database: 3629/6872 - Release Date: 11/27/13

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] FW: [Amps] Fw: Crimp connector die sizes, Matt <=