is the calibrate pot pushed in?
73
Jim W7RY
On 2/23/2014 8:02 PM, [email protected] wrote:
When you turn the rotor to its limits, does the antenna point 90
degrees off at the limits?
If so, I'd suspect something has slipped within the housing of the
rotor. If not, check the Calibration.
73
Don
N8DE
Quoting "Allen R. Brier" <[email protected]>:
Is it possible that the pot inside my TailTwister rotor has moved? My
antenna direction on my controller now shows 90 degrees off (to the
West)
for some reason. I climbed up the tower and confirmed that the mast
has not
slipped in the rotator clamp or at the boom to mast clamp. I checked
wiring
connections and all seems to be ok. Did the pot move 90 degrees?
Anyone ever
see this before? I would appreciate any advice on this before I go
through
the trouble of replacing the rotor with a spare. BTW, I am using a Green
Heron Engineering controller.
Allen R. Brier N5XZ / KL5DX
1515 Windloch Lane
Richmond, TX 77406-2553
281-342-1882 (Home)
713-705-4801 (Cell)
[email protected]
[email protected]
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|