Hi George
F-12 dose not use swaged tubing. So I have use WD 40- liberally and is
the assembler used a lot of penatrox you have to break it loose
I have used a propane torch and two mounted boom to plates mounted on each
side of the joint. Has worked for me every Time .
GL George
Wayne , W3EA . .
> From: georgeK5KG@aol.com
> Date: Sat, 12 Apr 2014 21:13:51 -0400
> To: towertalk@contesting.com
> CC: edgansen@gmail.com
> Subject: [TowerTalk] How to disassemble a boom?
>
> I am having a problem getting the boom sections apart on a F12 C31 boom.
> Any suggestions, pse.
>
> 73, George, K5KG
>
> Sent from my iPad
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|