Nathan,, a 4 X 4 wooden "pole" would be VERY heavy and VERY dangerous...
Spend the time to find a 2 1/2 X 2 1/2 square aluminum pole....you will need
it 14 ft long...
I have 2 of them,, and they use NO clamps at all,, but have slotted hooks
that fall into the angle members of Rohn 25, 35, 45, and 55 G--It fits them
all ...I have set hundreds of sections of tower with this pole,, and it’s
the best I have ever seen. It will handle loads of 200 lbs easily. I can
send you and anyone photos of the gin pole. It is so simple,, and easy to
work with... Get a good pole and it makes tower work so easy....73,, Dan
N4GNR
-----Original Message-----
From: Linux Mercedes
Sent: Thursday, July 17, 2014 5:57 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Wooden Gin Pole?
I'm finding out that it's rather tricky to get large aluminum pipe out my
way, especially something 12+ feet long.
I was thinking about building one from square steel tube, but I don't know
if that'd be too heavy for me to easily move around the tower, or too heavy
for the tower itself (Rohn 25G).
I also realized that a 12' 4x4 is about $15. If I rig it right so that I
get very little angular loading on it, would that suffice?
Thanks,
--Nathan
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4716 / Virus Database: 3986/7869 - Release Date: 07/17/14
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|