Hi Chip,
I have a pair from Harbor Freight similar to that (w/o bottle). I used it to
assemble ramps for my racecar's trailer. I used 3/16" SS rivets. I later found
it useful to repair the element-boom bracket on my F12 C-4XL.
vy 73 es gl,
Bryan WA7PRC
>________________________________
>
>Date: Fri, 8 Aug 2014 11:23:40 -0700
>From: Chip Margelli <chip@force12inc.com>
>To: towertalk@contesting.com
>Subject: [TowerTalk] Rivet Tool Info
>
>Hello to all.
>
>We've come across a very nice tool for inserting rivets beyond the "small"
>1/8" rivets used on smaller elements.
>
>Harbor Freight has an item called the Pittsburgh 18" Heavy Duty Hand
>Riveter that sells for all of $19.95. It makes work with 3/16" rivets
>effortless, and even a 1/4" rivet does not require major exertion. Trying
>to do either of these sizes with a hand pop rivet gun will lead to serious
>frustration. The Harbor Freight SKU is 66422, and most HF stores have these
>in stock, it seems.
>
>Heavy Duty 17-1/2" Hand Riveter With Collection Bottle
>
>This tool is especially useful when pulling rivets on larger elements, or
>on element-to-boom clamping plates, for beams from various manufacturers,
>not just Force 12. And it is much cheaper and less bulky than a pneumatic
>rivet gun.
>
>It even comes with a Collection Bottle, important for installers above the
>age of 55.
>
>73,
>
>Chip K7JA
>Force 12InnovAntennas America
>
>
>
>Heavy Duty 17-1/2" Hand Riveter With Collection Bottle
>Heavy Duty 17-1/2" Hand Riveter With Collection Bottle
>View on www.harborfreight.com Preview by Yahoo
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|