> Anyone have an idea of a matching system that would do all of the
> above ?
Any matching network would be *very* sensitive to the length of the
inverted L and ground quality. In all probability it will need to be
"cut and try" for your specific antenna.
73,
... Joe, W4TV
On 2014-09-14 9:45 AM, Gary Marks wrote:
I have an Inverted-L antenna for 80M & 160M and would like to make or buy a
remote matching system that would work on both ends of both bands that would accept
full power.
I built a system many years ago from a Doug DeMaw, W1FB, article in the May
1985 issue of QST but it has never worked as well as I wanted for whatever
reason.
If anyone is interested, this article can be found at the ARRL QST archives
http://www.arrl.org/arrl-periodicals-archive-search by entering W1FB , 1985,
May, QST.
Anyone have an idea of a matching system that would do all of the above ?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|