N2MO is using Andrew FSJ4-50B from the operating positions to the patch bay
and triplexers,
We ordered the 403A triplexers with the 7/16 DIN option, with the patch bay
being 7/16 DIN as well.
73 Martin
W2RWJ
Sent from my iPhone
> On Dec 26, 2014, at 10:34 AM, Rich Hallman - N7TR <rich@n7tr.com> wrote:
>
> Im re-cabling a 4 transmitter station and am looking for feedback on what you
> are using for interconnect coax after your amplifiers? I'm using double
> shielded RG8X for the low power connections to the low power bandpass filters
> then to the amplifier inputs. Looking to see if good quality RG213 / RG8
> (95-98% shield) is ok past the amps to the high power 4O3A filters or should
> I use something like LMR400 / BuryFlex for those connections to keep down the
> potential inter-station interference?
>
> Thanks...
> Rich
>
> Rich N7TR
> ex KI3V, N3AMK, WB3JOV
> http://www.qrz.com/db/N7TR
> Telnet: dxc.n7tr.com N7TR DXCluster
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|