The Budwig HQ-1 does not appear to be very robust but it did seem to have
more favorable comments than the competition. I spent at least an hour
searching and could not find a better center insulator unless I fabricate my
own. This is for a temporary contest expedition antenna so as long as it is
electrically secure it should work fine. I ordered one this afternoon.
Thanks,
John KK9A - WP2AA
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Dipole Center Insulator
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Mon, 09 Feb 2015 13:25:32 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On Mon,2/9/2015 12:29 PM, Dave Hachadorian wrote:
I use this one:
http://www.budwig.com/antenna-connector-insulators2.html
This is electrically quite nice, but needs serious strain relief if you're
putting much stress on it (heavy coax, a long run between supports, trees
that sway in the wind). When I've used them, I've added an egg insulator
above this one, clamped each conductor to secure it mechanically, then
looped the conductor down to the contacts, where I clamped them to the
contacts with copper split-bolt connectors. I also tied the two insulators
together with rigging rope.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|