Towertalk
[Top] [All Lists]

Re: [TowerTalk] engineering help? Antenna weight for US Tower TX472

To: kr2q@optimum.net, towertalk@contesting.com
Subject: Re: [TowerTalk] engineering help? Antenna weight for US Tower TX472
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Thu, 11 Jun 2015 10:36:05 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>


On 6/11/2015 10:07 AM, kr2q@optimum.net wrote:
Hi all,


2.  What point is the weak link for the 200 pounds?


Here is the surprising thing I ran into with my HDX-5106,
a MUCH bigger tower.  It has a MonstIR on top, figure
250 lbs.  Also a short mast and a prop pitch, figure
another 50 lbs.  Figure another 100 lbs for cables,
so lets call that 300 lbs.  Should be fine.

What happens is that when I get within about 5 feet
of full extension, I start to get noise and vibrations.
The working theory is that this is due to IMBALANCE of
weight, rather than just the weight itself.  The sections
start to bind a little when the overlap gets small.

I removed the antenna to change the cables in the tower,
and ran it up and down a few times, and the problem
went away under those conditions. The MonstIR has a
very flexible boom that exascerbates the imbalance
problem.  Once it starts to lean a little, the boom
flexes in the direction that makes it worse.

What I am doing as a workaround is manually stopping
the raising winch just before the problem begins.
I know from experience where this point is.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>