Towertalk
[Top] [All Lists]

Re: [TowerTalk] Inverted vee

To: Carol Richards <n2mm@comcast.net>
Subject: Re: [TowerTalk] Inverted vee
From: Thomas Noel <tnoel@mac.com>
Date: Thu, 22 Oct 2015 16:56:16 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Carol,

Since you didn’t give us the current length, I can only give you an estimate in 
percent. Add 2.84% divided equally to each side.

Example:  If current total wire is 129.5 feet long, multiply by 0.0284 = 3.678 
feet. divide by 2 = 1.84 feet (22 inches) added to each side.

Do the math with YOUR wire lengths.

Tom
KF7RSF

> On Oct 22, 2015, at 2:21 PM, Carol Richards <n2mm@comcast.net> wrote:
> 
> Hello,
> 
> 
> I have an inverted vee up about 100 feet. It resonates at 3615. From past 
> experience, how much should I add to each leg to get it down to 3515?
> 
> 
> Thanks,
> 
> 
> Carol 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>