these were shipped pretty quickly from Britain....
http://www.sark110.com/resources/g3tjp-calibration-loads
> On 10/30/2015 8:21:28 AM, Michael Tope (W4EF@ca.rr.com) wrote:
> > Wayne, you might check with Array Solutions. They list the following
> accessories in the price list under the AIM-4300 Analyzer:
>
> AS-PLS-U Standard Calibration load set PL259 up to 1 GHz $50.00
> AS-PLS-N Standard Calibration Load Set Type-N up to 1 GHz $60.00
>
> http://www.arraysolutions.com/pricelist.htm
>
> I am assuming since they call it a "set" that it includes an open,
> short, and load, but you would need to confirm that with them.
>
> 73, Mike W4EF...........
>
> On 10/29/2015 5:00 PM, Wayne Kline wrote:
> > Fellow TT'ers
> >
> > I bought a VNA type antenna analyzer . Just scratching the surface to
> > it' s capabilities. One thing I know I need to build a set OSL Open Short
> > Load
> > termination calibrator fittings. Spent some time on Google SMA homebrew
> > are easy to find... ( f I had bought a SARK 100 which has an SMA
> > connector I would be golden ) But I need info for an UHF or N
> > connector .
> >
> > Not wanting to reinvent the wheel anybody have info on such
> > animals ?
> >
> >
> > Wayne W3EA
> >
> >
>
> _______________________________________________
>
>
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|