The article written by Steve is available for all to read at the NCJ web
site. "Another Look at Guy Wire Interactions" is listed under the
Featured Articles section on the NCJ home page.
http://ncjweb.com/
--Kirk K4RO
On 3/16/2016 9:38 AM, Steve London wrote:
First of all, 10 to 13 feet guy wire length, before adding the first
insulator, would be absolutely the worst thing to do if you have a 15
meter antenna in the vicinity. Think about it - you have created a
resonant 1/2 wavelength 15 meter element consisting of two 1/4
wavelength wires, interconnected by the tower section.
I recently wrote an article, published in the Novemeber/December 2015
NCJ, on the subject of modeling and choosing guy wire lengths. It
partially debunked the old table in the ARRL Antenna Book of "good" guy
wire lengths.
73,
Steve, N2IC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|