Towertalk
[Top] [All Lists]

Re: [TowerTalk] Need source for G-2800 controller connector

To: bob <w9zv@comcast.net>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Need source for G-2800 controller connector
From: Simon Lewis <gm4plm@hotmail.com>
Date: Sat, 30 Apr 2016 10:49:45 +1200
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Array solutions?

I’ve seen them on ebay too
Plus I know you can get them at ukw bereichte in Europe



Sent from my Windows 10 phone

From: bob<mailto:w9zv@comcast.net>
Sent: Saturday, 30 April 2016 10:05 AM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: [TowerTalk] Need source for G-2800 controller connector

I have a G-2800 rotator that I am pulling out of the closet to use and I
cannot find a source for the Jones type connector that is on the rotator
controller box (NOT the rotator end).



The connector has two rows of 3 horizontal pins with one of them
keyed/oriented 90 deg from the others.  I have looked on Mouser/DigiKey and
while the have them with 6 pins in two rows, I cant find one with the one
pin keyed/polarized from the others?



Anyone have a source for them?



-bob, w9zv

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>