Tim,
The MFJ Antenna analyzers make good DIP meters.
I have used my MFJ-269 as a Dip Meter several times. I prefer it to
my Retro-Grid dip meter. Especially since the 269 has a built-in
digital counter.
If you have the MFJ-66 Dip meter adapters, you will find
instructions in the MFJ-66 manual..
If you do not have the manual, you can download from MFJ (only 7
pages).
73, Jim - w5ifp@gvtc.com
>> -----Original Message-----
>> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On
>> Behalf Of Gary Schafer
>> Sent: Monday, June 6, 2016 12:58 PM
>> To: 'Timothy Holmes' <taholmes160@gmail.com>;
>> towertalk@contesting.com
>> Subject: Re: [TowerTalk] Modeling antenna traps
>>
>> I don't think that you will have much luck with the MFJ used as a
>> grid dip meter. You will need a decent grid dip meter.
>>
>> 73
>> Gary K4FMX
>>
>> > -----Original Message-----
>> > From: TowerTalk [mailto:towertalk-bounces@contesting.com] On
>> Behalf Of
>> > Timothy Holmes
>> > Sent: Sunday, June 05, 2016 5:40 PM
>> > To: jim@audiosystemsgroup.com; towertalk@contesting.com
>> > Subject: Re: [TowerTalk] Modeling antenna traps
>> >
>> > Hi Jim
>> >
>> > I guess that goes to the crux of my question, how do I go about
>> > measuring those parameters, and, once I have done so, how do I
>> then
>> > model them.
>> > This
>> > is turning into quite an interesting discussion. I should
mention
>> > that I have an MFJ antenna analyzer with the grid dip coils if
that
>> > will help, as well as a multimeter
>> >
>> > TIM
>> > W8TAH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|