Towertalk
[Top] [All Lists]

Re: [TowerTalk] Best autotuner for Extended Double Zepp

To: Pete Smith N4ZR <n4zr@contesting.com>, TowerTalk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Best autotuner for Extended Double Zepp
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Mon, 20 Jun 2016 09:38:08 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 6/20/2016 8:32 AM, Pete Smith N4ZR wrote:
Looks like the best antenna I can put up in my current situation is an
EDZ.  Any thoughts on the best low-power (<200 W) autotuner for this
application? I would plan to put the tuner in a weatherproof enclosure
outside and run coax to the shack, feeding power to the tuner preferably
through the coax.


Are you building a true EDZ, meaning it operates on ONE BAND and is
exactly 1.25 wavelengths long? If so, it is easy to put a coil across the input terminals and then tap down on it to get 50 ohms balanced. Then you can use a 1:1 balun and run coax to the shack. WAY CHEAPER than an autotuner + weatherproof box, etc.

None of this applies if you are just driving a random length dipole
on multiple bands, and it accidentally happens 1.25 wavelengths on one of them.

I recently was researching autotuners for my truck.  It turns out
that 200 W is a tall order for almost all of them.  You really need
a so-called kilowatt tuner to be sure of reliable operation at
200 watts.  (Doesn't mean you can't get lucky; its a crap shoot).

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>