Towertalk
[Top] [All Lists]

Re: [TowerTalk] stacking vhf/uhf antennas

To: w5jmw@towerfarm.net, towertalk@contesting.com
Subject: Re: [TowerTalk] stacking vhf/uhf antennas
From: N1BUG <paul@n1bug.com>
Date: Tue, 5 Jul 2016 17:12:54 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
You might want to have a look at this tech note...

http://directivesystems.com/contact-us/tech-notes/stacking-dis-similar-yagis/

73,
Paul N1BUG


On 07/05/2016 04:35 PM, w5jmw@towerfarm.net wrote:
Hello to all.This might be a little off subject for this reflector and
if so just tell me where to post this question.I am getting to put up
tower one.it is for uhf/vhf.I have a set of klm 144-16 with the baluns
and combiner.Now at the top of the tower is a sidearm which will support
a w9inn 160/8o dipole.Ok,the mast is 15ft.usable,the rest is in the
tower for rotor.KLM suggest the stacking at 10ft.
nr1..Should I start at 5 ft up the mast?I also have a m2 432 yagi I
would like to put on this tower.
nr2..can I put the 432 in between the vhf stack.would it not throw the
parrern off.?
nr3..should I put the 432 on the bottom and give 3-5 ft between
vhf/uhf..Thanks and always 73..john
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>