Have you checked this website for hardware? - Mike
http://www.3starinc.com/25g_tower_accessories.html
-----Original Message-----
From: john@kk9a.com
Sent: Thursday, September 22, 2016 2:08 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Replacement Bolts for Rohn GB45D
The guy bracket uses different bolts than the tower joint kit.
John KK9A
To: "'Victor A. Kean, Jr.'" <vkean@k1lt.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Replacement Bolts for Rohn GB45D
From: "Tim Duffy" <k3lr@k3lr.com>
Reply-to: k3lr@k3lr.com
Date: Thu, 22 Sep 2016 12:57:42 -0400
Hello Victor:
Here are the same ones your tower had from Rohn:
https://www.dxengineering.com/parts/roh-45jbk
73
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
Victor A. Kean, Jr.
Sent: Wednesday, September 21, 2016 10:06 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Replacement Bolts for Rohn GB45D
I have a Rohn GB45D guy bracket that is missing many bolts. The bolts
that attach the inner brackets to the outer parts appear to be 3/8 x 16
grade 5 hot dip galzanized and the corresponding nuts appear to be
"heavy" hot dip galzanized and presumably grade 5 since the bolt would
be under tension.
Are my suppositions correct?
Anyone know where to find such hardware? I have already checked Bolt
Depot; Albany County Fasteners; Grainger; and Fastenall. Zinc plated
bolts are readily found, but not hot dip galvanized.
Thanks!
Victor, K1LT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|