Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 45 Bent Leg

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rohn 45 Bent Leg
From: <john@kk9a.com>
Date: Sat, 22 Oct 2016 14:11:34 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Why are you using stainless steel bolts instead of A325 structural bolts on
Rohn 45G?  The tower will definitely hold together while being lifted with a
crane using the correct hardware.

John KK9A

To:     <towertalk@contesting.com>
Subject:        [TowerTalk] Rohn 45 Bent Leg
From:   Dave Leisman <w8qwdave@casair.net>
Reply-to:       w8qwdave@casair.net
Date:   Fri, 21 Oct 2016 12:05:03 -0400

Another question is whether the stainless steel bolts holding the 6 sections

together are sufficiently strong enough to hold the 6 
sections together while I work on the damaged section.  



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>