Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G2800 DXA vs Yaesu G1000 in LM-470D Tower

To: "towertalk@contesting.com" <towertalk@contesting.com>, "W1TR@YCCC.org" <w1tr@yccc.org>
Subject: Re: [TowerTalk] Yaesu G2800 DXA vs Yaesu G1000 in LM-470D Tower
From: Wayne Kline <w3ea@hotmail.com>
Date: Wed, 8 Feb 2017 20:50:05 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi terry


 the 2800
Rotator Dimension:      8 inch dimater 13.675 inches high (200 x 345) mm

 and the 1000 are
Rotator Dimension:      7.5 inches diameter 12.5 inches high (186 x 300 mm)


I am not sure of the  47d's rotor shelf  but  it's only 1/2 in dia  bigger and  
1 1/8 in taller .


Wayne W3EA


________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Terry G. 
Glagowski / W1TR <w1tr@yccc.org>
Sent: Tuesday, February 7, 2017 5:54 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu G2800 DXA vs Yaesu G1000 in LM-470D Tower

Does anyone know if a Yaesu G-2800 DXA will fit into the top section of an 
LM-470D
motorized crank-up tilt-over tower where a Yaesu G-1000 DXA now is installed 
(dimensions)
?

73, Terry / W1TR  :  )


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

TowerTalk Info Page - 
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT 
members have lots of helpful information and are happy to share it.



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>