Make the inspector happy. It doesn't cost anything and if you do another job,
he'll remember you fondly.
Wes N7WS
On 5/14/2017 4:41 PM, Mike Ricketts wrote:
I've recently acquired an older (mid 90s) Universal Tower, very similar in
specs to their current HD-21-60.
Looking at the plans, the foundation (5x5x6) calls for only the 3 base
legs, and no rebar is specified.
http://universaltowers.com/pdf/HD_models/05-model%23-hd-21-60.pdf
Knowing K7LXC's advice to not do anything the manufacturer doesn't say, I
would be inclined to leave out the rebar.
However, both the city inspector and my concrete contractor both suggested
to add some rebar. The city won't decline it without it, he just advised
it. I was thinking about doing a very basic cage using 4 foot pieces of
rebar. I won't need anything fancy like some manufacturers require. Since
this is the place with many experts, I wanted to see what you folks thought
about it.
Thanks.
73,
Mike ND9G
_______________________________________________
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|