The current 2" and 3" versions (with 3/8" u-bolts) have plenty of u-bolt
length - I suspect the other sizes do as well, but I've only got the 2's
and 3's in front of me.
The 2" has 1.5" of bolt thread showing past the saddle when mounted on a
2" OD tube. The 3" has 1.25" of thread showing when on a 3" OD tube.
-Steve K8LX
On 7/1/2017 13:44 PM, john@kk9a.com wrote:
I purchased some of these from K5GO/N5DX for a temporary project. The
pricing was great and so was their customer service! I am not sure if the
design has changed since DX Engineering took over however the issue that I
had was I had to use a much thinner plate then I had planned because of the
short bolt length.
John KK9A
To: "'Steve Bookout'" <steve@nr4m.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Saddle clamps (muffler clamps)
From: "Tim Duffy" <k3lr@k3lr.com>
Reply-to: k3lr@k3lr.com
Date: Fri, 30 Jun 2017 21:12:01 -0400
Hello Grant:
If you are looking for Galvanized muffler clamps, these Cycle24 clamps at DX
Engineering are pretty inexpensive:
https://www.dxengineering.com/search/brand/cycle-24/product-line/cycle-24-ga
lvanized-economy-saddle-clamps?autoview=SKU&sortby=Default&sortorder=Ascendi
ng
73
Tim K3LR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|