Sorry, I meant what was Jim doing where he had the failures? It seems like I
remember him talking about running the hoist ropes over pulleys and down to
100# weights or something to prevent tree sway from shock loading the wire.
Chris
KF7P
On Aug 5, 2017, at 15:22 , Mickey Baker wrote:
I used 12g. Terminated the ends with strain relief through an eye, crimped back
on itself with an gently pressed S crimp over the insulation and a length of
heat shrink. I usually use a small ty-wrap around the S crimp... I have used a
larger ty-wrap and some tape in lieu of the S crimp. I haven't had a failure
since a named storm event.
Mickey
Mickey Baker, N4MB
Palm Beach Gardens
“Tell me, and I will listen. Show me, and I will understand. Involve me, and I
will learn.” Teton Lakota, American Indian Saying.
On Sat, Aug 5, 2017 at 3:42 PM, EZ Rhino <EZRhino@fastmovers.biz> wrote:
What gauge did you use, and how did you terminate the ends?
Chris
KF7P
On Aug 5, 2017, at 10:28 , Jim Brown wrote:
More than 10 years ago, I bought a bunch of this stuff and built wire antennas
with it. All broke within a year. I love Davis RF coax, but this wire is a
loser.
73, Jim K9YC
On 8/5/2017 8:39 AM, Mickey Baker wrote:
> I use the Davis FlexWeave insulated wire
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|