Towertalk
[Top] [All Lists]

Re: [TowerTalk] FW: Tower Grounds

To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Tower Grounds
From: jimlux <jimlux@earthlink.net>
Date: Tue, 17 Oct 2017 07:31:35 -0700
List-post: <mailto:towertalk@contesting.com>
On 10/17/17 6:47 AM, Clay Autery wrote:
So, would I be correct in assuming in this case, that it would be "better" to have the strap bond as close to the bottom/foundation as reasonable to reduce the "parallel conductor" distance?

In my case, there are threaded steel rods in the foundation, not a tower section...  So the bond would be made to the tower leg that is sitting/bolted in/to a steel clevis bolted to the threaded rod.  I will give additional attention to this inward force to which you refer in the mechanical design.... perhaps a thicker strap and more craftsmanship in the shaping thereof is in order. <wink>.


Why not just a lug on one of the bolts? Good clamping force, good electrical connection, etc. If you've already bolted the base to the rods, is there enough to put a lug and a second nut on top?

This brings up an interesting point, why is everybody talking about making "clamps" of some sort to clamp onto a structure which has bolted joints? I can see needing a clamp when you're grounding a long length of hardline that you don't want to break for a connector. And I've seen clamps on things like chain link fence posts (typically so that the gate is bonded to the rest of the fence - the fence posts are set in concrete in the soil, so they *are* a grounding electrode)




PS - Pretty stinkin' neat to learn something new.... Here's a link that explains the math/theory at a reasonably understandable level.  <smile>

http://www.kshitij-iitjee.com/Magnetic-force-between-two-parallel-conductors

Thanks Jim!

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 10/16/2017 11:11 PM, jimlux wrote:

Remember that parallel currents cause conductors to be forced together. So your conductor that is bowed out and away, and basically in parallel with the current carried through the base and concrete, is going to be pulled in towards the tower to try and minimize the gap.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>