Why must a balun provide isolation? how can a coil of coax be considered a
balun as there is no isolation of the currents on the inside of the coax
provided like there can be with a transformer.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Ward
Silver
Sent: Tuesday, December 12, 2017 17:19
To: towertalk@contesting.com
Subject: Re: [TowerTalk] common mode chokes, baluns and multiband, doublets
> "Balun", def: the most misused and misunderstood word in all of ham radio.
My approach, when discussing baluns, is to present the "balun" as a "function,"
not necessarily a "thing."
The balun "function" is to transfer power between balanced and unbalanced
systems while at the same time providing isolation between them.
Any "thing" that implements the function can be considered a "balun." There are
lots of "things" that implement the "function."
For example, here's a list of "things" that are all considered to be
"baluns":
- coil of coax
- coax wound on ferrite cores
- coax through ferrite beads
- quarter-wave sleeve
- Guanella transmission-line structure (a.k.a. "current balun")
- Ruthroff transmission-line structure (a.k.a. "voltage balun")
- half-wave transmission-line structure
- etc
Some of the "things" also implement impedance transformation, but impedance
transformers don't necessarily perform the balun "function,"
adding to the general confusion.
73, Ward N0AX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|