Jim,
RG-400 is excellent and easy to use with both crimped and solder connectors. I
use it exclusively for all inside RF cabling.
New and surplus-spool prices have been driven up during the last two years.
Prior to that, it was easy to find it for around $1 /ft.
Paul, W9AC
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Brown
Sent: Tuesday, January 16, 2018 1:13 PM
To: towertalk reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] Teflon Coax with Center That's NOT SCCCS?
Thanks for the many responses. RG400 is what I'm looking for. Yes, the
application is chokes. The cables for which I've found data sheets say 1-in
one-time bend radius.
Found what looks like a good source on EBay. Anyone know about Harbour
Industries? Looks to be in VT/QC, with mfg there.
73, Jim K9YC
On 1/16/2018 7:54 AM, Dean Jeutter wrote:
> Hello Jim,
>
> Perhaps you will find something useful from Cooner Wire. I used their
> wires and cables for years in my biomedical instrumentation work -
> their stuff is excellent: www.coonerwire.com/mini-coax/
>
> 73, Dean K3GGN
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|