Hi Rick,
Check out W9XT site, 'Make hardline coax connectors' using PL259. I would think
you could adapt it for N-connectors easily enough. I've got a large reel of
Comscope 1/2" hardline, aluminum outside and copper coated steel center lead
with Teflon disk spacers. I'm about to try W9XT's approach to this problem. The
big problem is really the center conductor being too big for the PL-259 in my
case. Going to be some fancy dermal work or hacksaw or something.
Terry
KI7M
> On January 30, 2018 at 7:34 AM Rick Wheeler wrote:
>
>
> I was able to purchase new a 475' roll of CommScope 1/2" HELIAX
> Superflexible Smoothwall Aluminum coax for my HF station for a very good
> price. I have about a 150' run from a two element 5 band quad up at 60'. And
> BTW, the "Superflexible cable" is not that flexible! But the specs are very
> good for HF.
>
>
> I have tried to find a way to attach the Type N connectors to the cable
> without the use of the expensive tools used typically by professional
> installers. I purchased pair of JMA 500 connectors but after watching their
> video they used some expensive tools and guns. I could splurge for a Prep
> tool but the HCG-Frameset compression gun is pricey. Nice and quick to be
> sure but thousands of dollars for tools I will use once very 10 years or so
> is steep.
>
>
> Is there a DIY guide to install type N connectors on 1/2" smoothwall? Do
> I need the compression tool or can it be done without one some other way? Has
> anyone made a DIY compression tool?
>
>
> Rick Wheeler
>
> K4LX
>
>
>
> Rick Wheeler
>
> [http://www.omalley.com/uploads/2/4/4/1/24411441/5669729.png]
> www.omalley.com
> O'Malley Manufacturing, Inc.
> 4228 8th Avenue South / Saint Petersburg, FL 33711
> info@omalley.com mailto:info@omalley.com
> Office: (727) 327-6817
> Toll Free: (800) 593-0004
> Fax: (727) 323-2771
>
> IMPORTANT NOTICE: This e-mail message is intended to be received only by
> persons entitled to receive the confidential information it may contain.
> E-mail messages to clients of O'Malley Manufacturing, Inc. may contain
> information that is confidential and legally privileged. Please do not read,
> copy, forward, or store this message unless you are an intended recipient of
> it. If you have received this message in error, please forward it to the
> sender and delete it completely from your computer system.
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com mailto:TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|
