Thanks Dave. My AN Wireless tower which is the one for sale, is different from
yours, in that my tower is a welded assembly in 10 foot sections. Each section
bolts together with 3 diagonal bolt-on braces between each section.
Unfortunately it does make it somewhat more difficult to transport than the
newer all bolt together design. According to AN Wireless, 4 sections will
"nest" together (with climbing steps removed) for more compact transport.
73,
Ed K3DNE
> On April 15, 2018 at 12:50 PM David Gilbert <xdavid@cis-broadband.com> wrote:
>
>
>
> This is a pretty good price for an outstanding tower. Since hauling ten
> foot sections with a large cross section can be problematic for most
> hams, I thought I would point out that this tower is assembled totally
> with bolts and could most likely be rather easily disassembled, moved,
> and reassembled. It would probably take a few trips to haul all the
> pieces with a pickup or trailer, but I think it could be done.
>
> The assembly instructions are here http://www.anwireless.com/assembly.pdf
>
> And starting here you can see several pictures of how I assembled and
> installed my own AN Wireless HD-70 tower
> http://www.ab7e.com/AB7E_Tower_Page_1.html
>
> By the way, I have that same 22' Chrome Moly mast and it's a brute. Mine
> has seen winds in excess of 100 mph with an OB16-3 and OB2-40 on it with
> no problems.
>
> 73,
> Dave AB7E
>
>
>
> On 4/15/2018 6:53 AM, Ed Kucharski wrote:
> > AN Wireless HD-60, 60 foot heavy duty self supporting tower
> > (see:http://www.anwireless.com/formore info, specs and present prices).
> > 2 Rotor Mounting Plates and 1 Thrust Bearing Plate (drilled for a Peer 2
> > in., 2 hole, flange bearing) in the top section.
> > 1 60 ft. Safety Lifeline System with DBI-SALA Safety Sleeve and Carabiner
> > 1 Full set of Step Bolts.
> > The tower is on the ground in 6 x 10ft. sections and ready for sale/pickup.
> > Photos available upon request for serious inquiries only.
> > $2100. Pick-up (only) at my Westminster, MD QTH.
> > Requires a 5 foot concrete base section (available from manufacturer) and
> > appropriate base.
> >
> > I do have a 4130 Chrome Moly ~22 foot, 2 inch OD, 1/4 inch wall Mast
> > available (sold separately ($200) or could bundle with the HD-60 Tower for
> > a total of $2250).
> > This tower can be converted into an 80 foot HHD-80 (Heavy-Heavy Duty Tower)
> > by adding 2 HHD sections to the bottom and HHD concrete base section (all
> > available from manufacturer).
> >
> >
> > 73,
> >
> > Ed K3DNE
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|