Towertalk
[Top] [All Lists]

Re: [TowerTalk] Force 12 Aluma-o-weld wire

To: "Tower Talk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Force 12 Aluma-o-weld wire
From: "Keith Dutson" <kdutson@sbcglobal.net>
Date: Fri, 4 May 2018 08:23:12 -0500
List-post: <mailto:towertalk@contesting.com>
I replaced the linear-loaded 40M element on my C-4XL antennas to the
coil-loaded element (obtained from Tom Schiller N6BT).

73, Keith NM5G

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Julio
Peralta
Sent: Friday, May 4, 2018 7:47 AM
To: Tower Talk <TowerTalk@contesting.com>
Subject: [TowerTalk] Force 12 Aluma-o-weld wire

What would be a suitable replacement for the Aluma-o-weld wire that F-12
uses on their antennas. I did a google search for Aluma-O-weld and didn't
find anything.

 

Julio, W4HY

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>