Some of us have "been there, been bitten" by the terrible water
migration in the first gen Belden 9913 with air dielectric. Trilogy
claims "no water migration" with their air dielectric outdoor version
and offer a 15 year warranty so perhaps...
Trilogy 7/8" specs seem very close to AVA5-50 except for bending
moment. Almost 2:1 Aircell vs AVA5. Not surprising with the solid Al
shield. So it will be less installer friendly, especially in conduit.
Flat plate crush favors Aircell by 1.75x so that is nice for those going
the direct burial route.
Is any pricing data available?
Grant KZ1W
On 7/6/2018 19:23 PM, GaryK9GS wrote:
Hello Clay,
I think Aircell brand coaxial cable is manufactured in Germany. It looks like
Trilogy is one of their US distributors.
73,
Gary K9GS
-------- Original message --------From: Clay Autery <KY5G@montac.com> Date:
7/6/18 6:44 PM (GMT-06:00) To: towertalk@contesting.com Subject: Re: [TowerTalk] N
connector, Re: UHF (PL259) soldered center
Anyone use this cable manufacturer? Made in Mississippi.... I'm
considering using them for my main tower runs.... maybe split a reel
with someone.
www.trilogycoax.com
73,
______________________
Clay Autery, KY5G
(318) 518-1389
snip..
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|