I agree with you guys. You can buy the OR2800 without the controller. The
Green Heron controller is a much better way to go. Also get the K7NV mast
clamp designed for the OR2800. The mast clamp that comes with the OR2800 slips
even when the clamp bolts are carefully torqued down. Ask me how I know this
hihi.
Here's info on the Green Heron controller and the K7NV mast clamp:
https://www.dxengineering.com/parts/ghe-rt-21-m2
http://www.k7nv.com/proppitch/id35.htm
BobK6UJ
From: Kent Olsen <kilo6dko@gmail.com>
To: towertalk@contesting.com
Sent: Sunday, August 26, 2018 1:09 PM
Subject: Re: [TowerTalk] Big Rak and HDX-555
ThaI did both!
The Green Heron works great!
73
Kent
N6WT
On Sun, Aug 26, 2018 at 1:03 PM <john@kk9a.com> wrote:
> From what I have read on towertalk, it is a good rotator if you throw away
> the mast clamp and controller.
>
> John KK9A
>
>
> From: Kent Olsen <kilo6dko@gmail.com>
> Date: Sun, 26 Aug 2018 08:14:01 -0700
>
> Phil
>
>
> I went with the M2 Orion 2800 rotor. It fits in the tower completely. It
> has been up for 3 years with a SteppIR DB36 with a NN4ZZ tilt plate. This
> is a very heavy combo, I have not had a bit of trouble.
>
> Thanks
> 73
> Kent
> N6WT
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|