I have no personal experience with the Orion 2800 rotator however as I
stated I have read numerous complaints over the last decade++ about the mast
slippage. If you are new to towertalk and never heard of this issue, it is
easy to search the archives. For example, here is a 2007 post by K7LXC :
http://lists.contesting.com/archives//html/towertalk/2007-04/msg00445.html
John KK9A
-----Original Message-----
From: Jim [mailto:jimw7ry@gmail.com]
Sent: Sunday, August 26, 2018 7:39 PM
To: john@kk9a.com; towertalk@contesting.com
Subject: RE: [TowerTalk] Big Rak and HDX-555
I have an older OR2800 with the M2 controller. Used it with N1MM and never
had an issue of any kind with the rotor or controller.
It works great! I had it on a TH7 with a XM240 above it on a 70' Rohn 45.
Stock mast clamp. NEVER did it slip in the 14 years I had it up.
I'm puzzled why you would think the mast clamp and controller are junk?
73
Jim W7RY
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Sunday, August 26, 2018 3:03 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Big Rak and HDX-555
>From what I have read on towertalk, it is a good rotator if you throw away
the mast clamp and controller.
John KK9A
From: Kent Olsen <kilo6dko@gmail.com>
Date: Sun, 26 Aug 2018 08:14:01 -0700
Phil
I went with the M2 Orion 2800 rotor. It fits in the tower completely. It has
been up for 3 years with a SteppIR DB36 with a NN4ZZ tilt plate. This is a
very heavy combo, I have not had a bit of trouble.
Thanks
73
Kent
N6WT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|