John,
I was wondering the same thing. My mast is 2" DOM, galvanized. I can see the
need for a shim if using a water pipe, 1.9" OD. Perhaps they factored in the
possibility of extra paint thickness or extra heavy galvanizing ? It has
been quite a while since I have installed my T2X, I am bringing it down for a
rebuild, I will check the mast diameter and the shims I used.
BobK6UJ
On Monday, December 17, 2018, 10:38:43 AM PST, john@kk9a.com
<john@kk9a.com> wrote:
I wonder why Hy-Gain designed their rotators for a Ø2.062 mast. 2" DOM
runs close to size, no more than Ø2.006 and galvanizing might add another
.003/ side.
John KK9A
Bob K6UJ wrote:
l looked it up in the manual. The T2X manual says maximum mast diameter
is 2 1/16"
73,BobK6UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|