Might be overkill, however I have seen a replacement coupling nut for a
PL-259 made out of 18-8 hex bar stock.
Martin W2RWJ
On 2/24/2019 1:03 PM, Grant Saviers wrote:
Nice to have a strain relief, but I've yet to see a PL259 barrel that
can withstand the casual abuse of FD "help" - dropping on the end,
stepping on it, dragging thru the mud, etc. Once bent, they need
replaced. There isn't any reason IMO the threaded section can't be
made much thicker for about $0.05. Anybody know of a source?
Grant KZ1W
On 2/23/2019 17:23 PM, Gary wrote:
The local radio club is opting to replace the ancient feedlines we
use at Field Day. It looks like we will be going to RG-8X. I have
crimped many connectors and have the proper tools to do so.
I am looking for a way to make the connector attachment to the coax
truly rugged! I have seen "manufactured" cables the have a strain
relief where the cable and connector come together. Is there a way
for the home user to do something similar?
Thanks and 73,
Gary kk0sd
gary_mayfield@hotmail.com<mailto:gary_mayfield@hotmail.com>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|