Steve,
PERFECT!!! Thanks.
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com
On 10/9/19 12:29 AM, VE6WZ Steve wrote:
I found this which might help:
http://www.arrl.org/files/file/QEX_Next_Issue/2016/July-August/Hinkle.pdf
73, de Steve Ve6Wz
Sent from my iPad
On Oct 8, 2019, at 9:18 PM, Jeff Blaine <KeepWalking188@ac0c.com
<mailto:KeepWalking188@ac0c.com>> wrote:
I have a number of feedlines that I want to apply GDT out in the field
too. This is to buy a bit of extra insurance on lightning events.
But I am wondering how to match up the GDT selection criteria with an
actual need. There are a number of specifications on the GDT and I
think you want to pick the lowest voltage one that (allowing for
tolerance) would not be triggered by expected RF AC levels.
Unfortunately the spec does not say "if you are hanging this off your
feedline, use this rule of thumb to size our DC spec to your needs."
What "DC spark over voltage" would be the proper pick to go with say
1500W @ 50 ohms (275 RMS volts)?
73/jeff/ac0c
alpha-charlie-zero-charlie
www.ac0c.com <http://www.ac0c.com>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com <mailto:TowerTalk@contesting.com>
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|