Towertalk
[Top] [All Lists]

[TowerTalk] PL-259 Reducer Question

To: <towertalk@contesting.com>
Subject: [TowerTalk] PL-259 Reducer Question
From: <john@ac4ca.us>
Date: Sat, 25 Jan 2020 13:29:19 -0600
List-post: <mailto:towertalk@contesting.com>
I'm replacing the PL-259 & "reducer" on a GAP Voyager. I'm out of PL-259s
and need to order more. I want to make sure I get the correct reducer.
Memory tells me there are two size reducers, each accommodating different
size RG-58 or RG-59, I assume. The GAP uses a rebranded "yellow" coax with a
diameter of ~.25" or ~6.2mm measured with  my inexpensive Husky caliper.
Checking the reducers I have on hand, the ones with the larger hole fit the
GAP coax. It begs the question, though, what are the appropriate reducer
sizes for the various smaller cables, 58/59/8X/6, etc? Why are there two
sizes and how can I make sure to order the correct reducers for the
appropriate coax in the future? John/AC4CA

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>