Towertalk
[Top] [All Lists]

Re: [TowerTalk] Broken Alpha Spid

To: "'towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Broken Alpha Spid
From: "W3YY" <w3yy@cox.net>
Date: Wed, 26 Feb 2020 13:06:59 -0500
List-post: <mailto:towertalk@contesting.com>
I've used the Yaesu G-1000DXA and G-2800DXA on 100ft and 120ft towers for 20 
years and have never had their mounting brackets fail.  I also now use the 
Green Heron controllers.  I would suspect that the failure reports you heard 
were because the rotators were installed improperly.

73, Bob - W3YY

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of W0MU 
Mike Fatchett
Sent: Wednesday, February 26, 2020 10:29 AM
To: towertalk
Subject: [TowerTalk] Broken Alpha Spid

It appears that my Alpha Spid cut loose in some heave wind recently.  I 
am looking to upgrade to something else.  I am turning a 4 ele SteppIR 
with the 30/40 loop and a 2 ele Cushcraft 40.

The Yaesu 2800 and Orion 2800 have been suggested.  I heard that you 
have to be careful with the Yaesu and the mounting bracket as you can 
break it.  I have a Green Heron Controller.

It has also been suggested to get the NV or LXC mounting brackets for 
the Orion.

Any other thoughts?

W0MU
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>