Towertalk
[Top] [All Lists]

Re: [TowerTalk] Broken Alpha Spid

To: "'Richard Thorne'" <rthorne@rthorne.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Broken Alpha Spid
From: "Tim Duffy" <k3lr@k3lr.com>
Date: Wed, 26 Feb 2020 14:47:44 -0500
List-post: <mailto:towertalk@contesting.com>
Hi Rich:

The RT-4500HD DXE Rotor will be available later this year. We have been doing 
aggressive testing here and we have made significant improvements.
We will have a few beta units in the field very soon. We'll let everyone know 
when they are ready.

73
Tim K3LR @ DXE

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Richard 
Thorne
Sent: Wednesday, February 26, 2020 1:22 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Broken Alpha Spid

Mike,

Another rotor to consider is DX Engineering's TR-4500HD.  It looks 
similar to an M2 Orion.  One of the neat features is the ability to 
easily change out the pulse counter switch without having to remove the 
rotor from service.  The only issue is it's still not available and has 
no field use that I'm aware of.  Maybe W5OV or K3LR can chime in here.

While I've never had to change out the pulse counter on my Orion, I did 
have to replace the counter in my prop pitch due to a lighting strike.  
Luckily the prop pitch is at ground level as it turns a rotating tower.  
I'm not sure why the Orion was not damaged during the same lightning 
event as I think that particular tower is the one that took the hit.

I use an M2 Orion with an upgraded mast clamp from Champion Radio.  It 
turns a F12 C31xr and a F12 Delta 230/240.  We get high winds here on a 
regular basis and so far, knock on wood, I have had no issues.

I did have an issue with the original M2 mast clamp as it would allow 
the mast to slip so I replace it with the Champion mast clamp.  I was 
hesitant though as I always thought the slipping mast was a good 'fuse' 
to protect the rotor.  It got to the point it was slipping on a regular 
basis so I took the plunge and replaced it.  So far so good.

Rich - N5ZC

On 2/26/2020 9:29 AM, W0MU Mike Fatchett wrote:
> It appears that my Alpha Spid cut loose in some heave wind recently. I 
> am looking to upgrade to something else.  I am turning a 4 ele SteppIR 
> with the 30/40 loop and a 2 ele Cushcraft 40.
>
> The Yaesu 2800 and Orion 2800 have been suggested.  I heard that you 
> have to be careful with the Yaesu and the mounting bracket as you can 
> break it.  I have a Green Heron Controller.
>
> It has also been suggested to get the NV or LXC mounting brackets for 
> the Orion.
>
> Any other thoughts?
>
> W0MU
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>