Jim nailed it. Thats the easiest and cleanest cut. I use a 4" Harbor
Freight angle grinder with a thin cut off wheel. Works great.
Bob
K6UJ
> On Jun 27, 2020, at 12:29 PM, J. Hunt via TowerTalk
> <towertalk@contesting.com> wrote:
>
> Electrical tape either side of cut area and a grinder.
> About 5 seconds and your done.
>
> Kindly use Safety glasses / goggles.
>
> Thanks,
> James On Saturday, June 27, 2020, 02:20:40 PM CDT, Wayne Kline
> <w3ea@hotmail.com> wrote:
>
> Phil,
>
> I do the electrical tape and use either in the field a 36 in long BOLT
> cutter or in the shop a high speed Wizzer ( cut off tool )
>
> Wayne ,W3EA
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>
> From: Phil<mailto:pmills7@comcast.net>
> Sent: Saturday, June 27, 2020 3:08 PM
> To: towertalk@contesting.com<mailto:towertalk@contesting.com>
> Subject: [TowerTalk] How best to cut 1/4 inch ss cable?
>
> Any recommendations? I was thinking about taping
> the place for the cut with electrical tape and then
> wedging it in a piece of copper tubing....
>
> thanks, 73, Phil W5BVB
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|