Towertalk
[Top] [All Lists]

Re: [TowerTalk] Straightening 45g tower base

To: towertalk <towertalk@contesting.com>
Subject: Re: [TowerTalk] Straightening 45g tower base
From: "jcjacobsen@q.com" <jcjacobsen@q.com>
Date: Sat, 4 Jul 2020 20:51:01 -0400 (EDT)
List-post: <mailto:towertalk@contesting.com>
How do, 

Regarding wind load of 45G tower. If I read the original post correctly, the 
tower is a 45G SR ie: SOLID ROD. As such, and if this is true, the wind load, 
per Rohn specs, is: 110 mph 3 sec gust exp B 35 sq ft and exp C 22 sq ft. If 
it's std 45 G, won't take 110 gust. At 90 mph 3 sec gust, its rated at 4.9 sq 
ft. And I think someone should run the figures again on how much it would be 
off over 40 foot. If it's off 1" at the top of the short base, well my common 
sense says it off more than 4" at 40 foot. (But then I am old and senile) 

73 
K9wn Jake 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>