I should have expressed myself more clearly. I am interested in only yagi
designs, no wire beams, no quads, no traps. Picky, aren't I? :-)
All of the antennas I listed and the one I am going to build are mounted on
one, Rohn 55, rotating tower, 155 feet high, with rotator at the 5 foot
level.
I've used traps in the past. I have used quads in the past. Both designs
are good for particular situations. But for higher efficiency, I'm going
to stick with full size, all metal tubing antennas.
K4TO
On Thu, Jul 9, 2020 at 3:49 PM Dave Sublette <k4to.dave@gmail.com> wrote:
> I am looking for a design for a 10 and 15 meter yagi on a single boom. I
> have a couple of ideas to model, but I thought I would ask here to see what
> your favorites are. I don't want to buy a commercial product. I have
> plenty of boom and element tubing and have home brewed all of my antennas
> through 432 MHz for 30 years.
>
> I use a program called Antenna Model which works quite well. In the past
> three years I have modeled and put up a pair of 40M Moxons, a four element
> 20M OWA (G0KSC design modified for my tubing sizes), and a full sized 40M
> dipole. They all work great and match the model closely.
>
> I'm just looking for ideas.
>
> Thanks and 73,
>
> Dave, K4TO
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|