On 8/1/20 10:30 AM, n2fmc130 wrote:
Found this on eBay;
https://www.ebay.com/c/1589884665
Dwight
n2fmc130@gmail.com
No serial interface..
It's actually a current product from LDG - and yes, anything that has
the CAT interface has a serial port, but it would need reprogramming..
On Aug 1, 2020, at 10:19, Gary <gary_mayfield@hotmail.com> wrote:
Will the MFJ-933B read the power back? I know you can bump the L or C
with the remote control. I used to have one in a box out by the
antenna, but that was a couple shacks ago.
73,
Gary kk0sd
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of jimlux
Sent: Saturday, August 1, 2020 8:13 AM
To: towertalk <towertalk@contesting.com>
Subject: [TowerTalk] remote controlled tuners?
I'm looking for an antenna tuner that has explicit remote control of L
and C, and able to read the forward and reverse power back. LDG
doesn't make the AT200PC any more, which had a serial port control to
set the Ls and Cs, etc. Most "remote tuners" have a "tune" input and
that's it.
The PAL-STAR HF AUTO has a RS-232 control, but is kind of overkill - I
only need 100W kind of power handling capability, and its really not
designed for remote mounting.
I suppose I could get something like a MFJ 939 and reprogram the PIC
16F76 inside, but a) it's probably soldered in, and b)I'd rather have
something off the shelf.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|